This is the latest recevied telemetry packets stored in our database for station/object VA3ZAW-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791487188 | 4.78 VDC | 0 | 0 | 0 | 0 |
| 1791486288 | 4.78 VDC | 0 | 0 | 0 | 0 |
| 1791485388 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791484487 | 4.77 VDC | 0 | 0 | 0 | 0 |
| 1791483587 | 4.74 VDC | 0 | 0 | 0 | 0 |
| 1791482687 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791481786 | 4.73 VDC | 0 | 0 | 0 | 0 |
| 1791480886 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1791479986 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1791479086 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1791478185 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1791477285 | 4.72 VDC | 0 | 0 | 0 | 0 |
| 1791476385 | 4.73 VDC | 0 | 0 | 0 | 0 |
| 1791475484 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1791474583 | 4.7 VDC | 0 | 0 | 0 | 0 |
| 1791473683 | 4.74 VDC | 0 | 0 | 0 | 0 |
| 1791472783 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791471883 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791470982 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791470082 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791469182 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791468282 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791467381 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791466481 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1791465581 | 4.74 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)