This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BAT* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755372525 | 2.77 V | 0 | 0 | 0 | 0 |
| 1755367686 | 2.46 V | 0 | 0 | 0 | 0 |
| 1755367086 | 2.55 V | 0 | 0 | 0 | 0 |
| 1755366486 | 2.59 V | 0 | 0 | 0 | 0 |
| 1755365886 | 2.7 V | 0 | 0 | 0 | 0 |
| 1755365286 | 2.79 V | 0 | 0 | 0 | 0 |
| 1755364686 | 2.87 V | 0 | 0 | 0 | 0 |
| 1755363486 | 3.07 V | 0 | 0 | 0 | 0 |
| 1755362886 | 3.16 V | 0 | 0 | 0 | 0 |
| 1755362286 | 3.23 V | 0 | 0 | 0 | 0 |
| 1755361686 | 3.27 V | 0 | 0 | 0 | 0 |
| 1755361086 | 3.31 V | 0 | 0 | 0 | 0 |
| 1755360486 | 3.35 V | 0 | 0 | 0 | 0 |
| 1755359886 | 3.37 V | 0 | 0 | 0 | 0 |
| 1755359286 | 3.37 V | 0 | 0 | 0 | 0 |
| 1755358686 | 3.42 V | 0 | 0 | 0 | 0 |
| 1755358086 | 3.44 V | 0 | 0 | 0 | 0 |
| 1755357486 | 3.45 V | 0 | 0 | 0 | 0 |
| 1755356886 | 3.47 V | 0 | 0 | 0 | 0 |
| 1755356286 | 3.49 V | 0 | 0 | 0 | 0 |
| 1755355686 | 3.51 V | 0 | 0 | 0 | 0 |
| 1755355086 | 3.51 V | 0 | 0 | 0 | 0 |
| 1755354486 | 3.53 V | 0 | 0 | 0 | 0 |
| 1755353886 | 3.54 V | 0 | 0 | 0 | 0 |
| 1755353286 | 3.55 V | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
BAT: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)