This is the latest recevied telemetry packets stored in our database for station/object IZ2GAJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787553647 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1787553428 | 4 VDC | 0 | 0 | 0 | 0 |
| 1787535942 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1787531425 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1787526909 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1787522393 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1787517877 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1787513361 | 3.75 VDC | 0 | 0 | 0 | 0 |
| 1787508845 | 3.77 VDC | 0 | 0 | 0 | 0 |
| 1787505845 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1787503052 | 3.78 VDC | 0 | 0 | 0 | 0 |
| 1787498536 | 3.8 VDC | 0 | 0 | 0 | 0 |
| 1787494020 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1787489504 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1787484988 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1787480472 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1787475956 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1787472811 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1787472656 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1787470525 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1787469983 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1787469723 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1787469205 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1787468876 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1787468352 | 4.05 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)