EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

HS4IOO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TEMP*	HUM*	BAR*	BAT*
1775492019	35.65 °C	46.4 %RH	1002.1 hPa	4.12 V
1775490002	36.31 °C	43.2 %RH	1002 hPa	4.18 V
1775486018	36.56 °C	44.1 %RH	1001 hPa	4.19 V
1775485418	36.61 °C	43.4 %RH	1000.8 hPa	4.19 V
1775483621	36.93 °C	41.3 %RH	1000.4 hPa	4.18 V
1775483021	36.79 °C	41.4 %RH	1000.2 hPa	4.18 V
1775481218	37.43 °C	38 %RH	999.9 hPa	4.19 V
1775479418	37.77 °C	34.9 %RH	999.3 hPa	4.19 V
1775477621	37.72 °C	30.4 %RH	999 hPa	4.11 V
1775475821	39.09 °C	27.8 %RH	998.8 hPa	4.19 V
1775474018	39.95 °C	27.5 %RH	998.7 hPa	4.19 V
1775472218	39.99 °C	29.3 %RH	998.6 hPa	4.11 V
1775470368	41.09 °C	30.6 %RH	998.6 hPa	4.19 V
1775467585	42.02 °C	30.2 %RH	998.7 hPa	4.18 V
1775465184	42.25 °C	28.6 %RH	998.9 hPa	4.19 V
1775462618	42.43 °C	26.7 %RH	999.1 hPa	4.18 V
1775460768	41.11 °C	27.6 %RH	999.6 hPa	4.17 V
1775457817	40.2 °C	27.3 %RH	1000.5 hPa	4.14 V
1775455801	36.47 °C	28.9 %RH	995.5 hPa	4.19 V
1775453618	39.61 °C	31.2 %RH	1001.9 hPa	4.1 V
1775451817	39.08 °C	31.7 %RH	1002.4 hPa	4.19 V
1775450017	38.4 °C	33.7 %RH	1002.7 hPa	4.1 V
1775448220	38.09 °C	35.1 %RH	1003.1 hPa	4.18 V
1775446419	37.59 °C	35.6 %RH	1003.2 hPa	4.18 V
1775444616	36.31 °C	36.5 %RH	1003.4 hPa	4.19 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)