This is the latest recevied telemetry packets stored in our database for station/object OK4AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1790087507 | 33.36 C | 40.2 % | 986.2 | 3.93 V | 12 |
| 1790087498 | 33.34 C | 40.2 % | 986.2 | 3.93 V | 12 |
| 1790087447 | 33.33 C | 40.28 % | 986.2 | 3.92 V | 12 |
| 1790087438 | 33.33 C | 40.3 % | 986.2 | 3.92 V | 12 |
| 1790087394 | 33.31 C | 40.35 % | 986.3 | 3.91 V | 12 |
| 1790087387 | 33.31 C | 40.4 % | 986.3 | 3.91 V | 12 |
| 1790087378 | 33.31 C | 40.41 % | 986.3 | 3.91 V | 12 |
| 1790087326 | 33.31 C | 40.52 % | 986.3 | 3.91 V | 12 |
| 1790087317 | 33.31 C | 40.52 % | 986.3 | 3.91 V | 12 |
| 1790087266 | 33.36 C | 40.65 % | 986.3 | 3.9 V | 12 |
| 1790087257 | 33.36 C | 40.59 % | 986.3 | 3.9 V | 12 |
| 1790087206 | 33.43 C | 40.8 % | 986.3 | 3.9 V | 12 |
| 1790087197 | 33.43 C | 40.8 % | 986.3 | 3.9 V | 12 |
| 1790087168 | 32.93 C | 40.85 % | 986.3 | 3.89 V | 12 |
| 1790087124 | 32.88 C | 40.93 % | 986.3 | 3.89 V | 12 |
| 1790087108 | 32.86 C | 40.96 % | 986.3 | 3.89 V | 12 |
| 1790087073 | 32.83 C | 41.04 % | 986.3 | 3.89 V | 12 |
| 1790087064 | 32.81 C | 41.05 % | 986.3 | 3.89 V | 12 |
| 1790087060 | 32.81 C | 41.05 % | 986.3 | 3.89 V | 12 |
| 1790087048 | 32.79 C | 41.11 % | 986.3 | 3.88 V | 12 |
| 1790087027 | 32.77 C | 41.13 % | 986.3 | 3.88 V | 12 |
| 1790087001 | 32.74 C | 41.15 % | 986.3 | 3.88 V | 12 |
| 1790086987 | 32.72 C | 41.2 % | 986.3 | 3.88 V | 12 |
| 1790086941 | 32.65 C | 41.3 % | 986.3 | 3.88 V | 12 |
| 1790086938 | 32.65 C | 41.34 % | 986.3 | 3.87 V | 12 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)