This is the latest recevied telemetry packets stored in our database for station/object F4MLV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX_rate* | RelRate* | DrpRate* | Value5* |
|---|---|---|---|---|---|
| 1795360267 | 4.2 VDC | 240 pkt/h | 36 pkt/h | 204 pkt/h | 0 |
| 1795359368 | 4.2 VDC | 96 pkt/h | 52 pkt/h | 44 pkt/h | 0 |
| 1795356676 | 4.19 VDC | 80 pkt/h | 44 pkt/h | 36 pkt/h | 0 |
| 1795355771 | 4.2 VDC | 108 pkt/h | 52 pkt/h | 56 pkt/h | 0 |
| 1795354872 | 4.2 VDC | 108 pkt/h | 56 pkt/h | 52 pkt/h | 0 |
| 1795353974 | 4.21 VDC | 128 pkt/h | 60 pkt/h | 68 pkt/h | 0 |
| 1795353075 | 4.19 VDC | 104 pkt/h | 60 pkt/h | 44 pkt/h | 0 |
| 1795352177 | 4.2 VDC | 156 pkt/h | 88 pkt/h | 68 pkt/h | 0 |
| 1795351277 | 4.21 VDC | 248 pkt/h | 128 pkt/h | 120 pkt/h | 0 |
| 1795350378 | 4.2 VDC | 124 pkt/h | 56 pkt/h | 68 pkt/h | 0 |
| 1795349479 | 4.19 VDC | 94 pkt/h | 70 pkt/h | 23 pkt/h | 0 |
| 1795348563 | 4.2 VDC | 128 pkt/h | 72 pkt/h | 56 pkt/h | 0 |
| 1795346774 | 4.21 VDC | 111 pkt/h | 68 pkt/h | 44 pkt/h | 0 |
| 1795344967 | 4.21 VDC | 135 pkt/h | 64 pkt/h | 72 pkt/h | 0 |
| 1795344066 | 4.21 VDC | 88 pkt/h | 52 pkt/h | 36 pkt/h | 0 |
| 1795341370 | 4.19 VDC | 128 pkt/h | 64 pkt/h | 64 pkt/h | 0 |
| 1795340471 | 4.19 VDC | 108 pkt/h | 52 pkt/h | 56 pkt/h | 0 |
| 1795339573 | 4.21 VDC | 124 pkt/h | 64 pkt/h | 60 pkt/h | 0 |
| 1795338674 | 4.2 VDC | 116 pkt/h | 60 pkt/h | 56 pkt/h | 0 |
| 1795337775 | 4.21 VDC | 120 pkt/h | 76 pkt/h | 44 pkt/h | 0 |
| 1795336878 | 4.21 VDC | 88 pkt/h | 60 pkt/h | 28 pkt/h | 0 |
| 1795335980 | 4.21 VDC | 92 pkt/h | 56 pkt/h | 36 pkt/h | 0 |
| 1795335088 | 4.2 VDC | 120 pkt/h | 56 pkt/h | 64 pkt/h | 0 |
| 1795334189 | 4.21 VDC | 256 pkt/h | 36 pkt/h | 220 pkt/h | 0 |
| 1795332384 | 4.21 VDC | 336 pkt/h | 88 pkt/h | 248 pkt/h | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)