This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795360893 | 358 Count | 703 Count | 206 Count | 4.14 VDC | 0 VDC |
| 1795360292 | 353 Count | 689 Count | 203 Count | 4.15 VDC | 0 VDC |
| 1795359691 | 347 Count | 679 Count | 200 Count | 4.15 VDC | 0 VDC |
| 1795359091 | 342 Count | 671 Count | 197 Count | 4.16 VDC | 0 VDC |
| 1795358490 | 336 Count | 660 Count | 194 Count | 4.13 VDC | 0 VDC |
| 1795357890 | 331 Count | 649 Count | 191 Count | 4.12 VDC | 0 VDC |
| 1795357289 | 325 Count | 637 Count | 188 Count | 4.13 VDC | 0 VDC |
| 1795356688 | 320 Count | 626 Count | 185 Count | 4.13 VDC | 0 VDC |
| 1795356088 | 315 Count | 617 Count | 182 Count | 4.13 VDC | 0 VDC |
| 1795355487 | 309 Count | 605 Count | 179 Count | 4.13 VDC | 0 VDC |
| 1795354887 | 304 Count | 593 Count | 176 Count | 4.14 VDC | 0 VDC |
| 1795354286 | 297 Count | 580 Count | 172 Count | 4.14 VDC | 0 VDC |
| 1795353685 | 292 Count | 570 Count | 169 Count | 4.13 VDC | 0 VDC |
| 1795353084 | 286 Count | 556 Count | 166 Count | 4.13 VDC | 0 VDC |
| 1795352483 | 280 Count | 542 Count | 162 Count | 4.12 VDC | 0 VDC |
| 1795351883 | 275 Count | 532 Count | 159 Count | 4.13 VDC | 0 VDC |
| 1795351282 | 269 Count | 518 Count | 156 Count | 4.14 VDC | 0 VDC |
| 1795350682 | 263 Count | 503 Count | 152 Count | 4.14 VDC | 0 VDC |
| 1795350081 | 257 Count | 490 Count | 149 Count | 4.14 VDC | 0 VDC |
| 1795349480 | 252 Count | 477 Count | 146 Count | 4.13 VDC | 0 VDC |
| 1795348880 | 246 Count | 469 Count | 143 Count | 4.14 VDC | 0 VDC |
| 1795348279 | 241 Count | 458 Count | 140 Count | 4.14 VDC | 0 VDC |
| 1795347678 | 235 Count | 446 Count | 136 Count | 4.13 VDC | 0 VDC |
| 1795347077 | 228 Count | 434 Count | 132 Count | 4.13 VDC | 0 VDC |
| 1795346477 | 223 Count | 421 Count | 129 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)