This is the latest recevied telemetry packets stored in our database for station/object DO3MLA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754168375 | 4.06 VDC | 2.44 VDC | 0 | 0 | 0 |
| 1754167475 | 4.06 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1754166575 | 4.05 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1754165675 | 4.06 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1754164775 | 4.06 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1754163875 | 4.06 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1754162974 | 4.05 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1754162077 | 4.07 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1754161177 | 4.06 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1754160277 | 4.04 VDC | 2.5 VDC | 0 | 0 | 0 |
| 1754159377 | 4.07 VDC | 2.54 VDC | 0 | 0 | 0 |
| 1754158477 | 4.06 VDC | 2.64 VDC | 0 | 0 | 0 |
| 1754157576 | 4.21 VDC | 2.76 VDC | 0 | 0 | 0 |
| 1754156677 | 4.04 VDC | 2.8 VDC | 0 | 0 | 0 |
| 1754155776 | 4.04 VDC | 2.8 VDC | 0 | 0 | 0 |
| 1754154876 | 4.07 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754153976 | 4.05 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754153076 | 4.21 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754152176 | 4.16 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754151276 | 4.04 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754150376 | 4.05 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754149476 | 4.04 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754148576 | 4.07 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754147675 | 4.16 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1754146775 | 4.16 VDC | 2.82 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)