This is the latest recevied telemetry packets stored in our database for station/object HB3YNV-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1765816986 | 3.56 VDC | 22.9 C | 39.2 % | 887.75 hPa | 0 |
| 1765813262 | 3.62 VDC | 22.9 C | 39.14 % | 895.88 hPa | 0 |
| 1765808717 | 3.69 VDC | 23 C | 37.98 % | 880.88 hPa | 0 |
| 1765803437 | 3.75 VDC | 23.1 C | 32.35 % | 1026 hPa | 0 |
| 1765803197 | 3.75 VDC | 22.5 C | 32.33 % | 1026.13 hPa | 0 |
| 1765802968 | 3.76 VDC | 21.7 C | 32.56 % | 1025.5 hPa | 0 |
| 1765797606 | 3.82 VDC | 20.1 C | 39.17 % | 1012.25 hPa | 0 |
| 1765795928 | 3.83 VDC | 19.5 C | 34.32 % | 1025 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)