This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790086916 | 191 Count | 380 Count | 126 Count | 4.21 VDC | 0 VDC |
| 1790086015 | 169 Count | 339 Count | 109 Count | 4.22 VDC | 0 VDC |
| 1790085114 | 145 Count | 287 Count | 94 Count | 4.21 VDC | 0 VDC |
| 1790084213 | 127 Count | 240 Count | 81 Count | 4.26 VDC | 0 VDC |
| 1790083312 | 104 Count | 187 Count | 67 Count | 4.26 VDC | 0 VDC |
| 1790082411 | 74 Count | 138 Count | 50 Count | 4.25 VDC | 0 VDC |
| 1790081510 | 47 Count | 92 Count | 32 Count | 4.25 VDC | 0 VDC |
| 1790080609 | 23 Count | 44 Count | 15 Count | 4.22 VDC | 0 VDC |
| 1790079708 | 661 Count | 1040 Count | 465 Count | 4.22 VDC | 0 VDC |
| 1790078808 | 628 Count | 991 Count | 441 Count | 4.23 VDC | 0 VDC |
| 1790077907 | 601 Count | 944 Count | 422 Count | 4.22 VDC | 0 VDC |
| 1790077006 | 580 Count | 903 Count | 408 Count | 4.25 VDC | 0 VDC |
| 1790076105 | 547 Count | 848 Count | 382 Count | 4.23 VDC | 0 VDC |
| 1790075204 | 521 Count | 796 Count | 363 Count | 4.27 VDC | 0 VDC |
| 1790074303 | 496 Count | 747 Count | 346 Count | 4.23 VDC | 0 VDC |
| 1790073402 | 474 Count | 700 Count | 330 Count | 4.23 VDC | 0 VDC |
| 1790072501 | 451 Count | 655 Count | 315 Count | 4.27 VDC | 0 VDC |
| 1790071600 | 430 Count | 611 Count | 301 Count | 4.23 VDC | 0 VDC |
| 1790070700 | 407 Count | 562 Count | 284 Count | 4.27 VDC | 0 VDC |
| 1790069799 | 388 Count | 515 Count | 269 Count | 4.25 VDC | 0 VDC |
| 1790068898 | 365 Count | 464 Count | 252 Count | 4.22 VDC | 0 VDC |
| 1790067997 | 344 Count | 418 Count | 237 Count | 4.25 VDC | 0 VDC |
| 1790067096 | 319 Count | 383 Count | 220 Count | 4.25 VDC | 0 VDC |
| 1790066195 | 301 Count | 355 Count | 206 Count | 4.26 VDC | 0 VDC |
| 1790065293 | 275 Count | 324 Count | 189 Count | 4.22 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)