This is the latest recevied telemetry packets stored in our database for station/object EA7JYN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1771552784 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1771551880 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1771550974 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1771550070 | 3.58 VDC | 0 | 0 | 0 | 0 |
| 1771549151 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1771549135 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1771549119 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1771549103 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1771549001 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1771548738 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1771548722 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1771548706 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1771547742 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1771547137 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1771546233 | 3.76 VDC | 0 | 0 | 0 | 0 |
| 1771545329 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1771544425 | 3.81 VDC | 0 | 0 | 0 | 0 |
| 1771543521 | 3.82 VDC | 0 | 0 | 0 | 0 |
| 1771542839 | 3.83 VDC | 0 | 0 | 0 | 0 |
| 1771542423 | 3.83 VDC | 0 | 0 | 0 | 0 |
| 1771541519 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1771540615 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1771539711 | 3.86 VDC | 0 | 0 | 0 | 0 |
| 1771539310 | 3.86 VDC | 0 | 0 | 0 | 0 |
| 1771538990 | 3.87 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)