This is the latest recevied telemetry packets stored in our database for station/object W6CWB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762815953 | 4.2 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762815051 | 4.2 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762814150 | 4.14 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762813248 | 4.08 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762812346 | 4.03 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762811444 | 3.97 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762810543 | 3.9 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762809641 | 3.84 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762808740 | 3.79 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762807838 | 3.76 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762806936 | 3.73 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762806035 | 3.69 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762805133 | 3.64 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762804231 | 3.58 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762803330 | 3.53 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762802428 | 3.41 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762801526 | 3.14 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762800468 | 2.95 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762799566 | 2.97 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762798665 | 2.99 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762797763 | 3.02 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762796862 | 3.04 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762795960 | 3.06 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762795058 | 3.08 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1762794157 | 3.1 VDC | 0.54 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)