This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779477522 | 286 Count | 931 Count | 271 Count | 4.11 VDC | 0 VDC |
| 1779475721 | 264 Count | 849 Count | 250 Count | 4.08 VDC | 0 VDC |
| 1779473920 | 247 Count | 783 Count | 234 Count | 4.11 VDC | 0 VDC |
| 1779472119 | 227 Count | 711 Count | 215 Count | 4.07 VDC | 0 VDC |
| 1779470319 | 206 Count | 644 Count | 195 Count | 4.1 VDC | 0 VDC |
| 1779468518 | 171 Count | 544 Count | 161 Count | 4.09 VDC | 0 VDC |
| 1779466717 | 151 Count | 470 Count | 142 Count | 4.11 VDC | 0 VDC |
| 1779464925 | 127 Count | 403 Count | 123 Count | 4.11 VDC | 0 VDC |
| 1779463124 | 108 Count | 332 Count | 105 Count | 4.09 VDC | 0 VDC |
| 1779461323 | 64 Count | 194 Count | 62 Count | 4.1 VDC | 0 VDC |
| 1779459523 | 36 Count | 110 Count | 35 Count | 4.09 VDC | 0 VDC |
| 1779457722 | 29 Count | 87 Count | 29 Count | 4.08 VDC | 0 VDC |
| 1779455921 | 366 Count | 1045 Count | 349 Count | 4.11 VDC | 0 VDC |
| 1779454121 | 346 Count | 978 Count | 330 Count | 4.11 VDC | 0 VDC |
| 1779452320 | 324 Count | 918 Count | 309 Count | 4.08 VDC | 0 VDC |
| 1779450519 | 295 Count | 819 Count | 281 Count | 4.12 VDC | 0 VDC |
| 1779448719 | 277 Count | 784 Count | 264 Count | 4.08 VDC | 0 VDC |
| 1779446918 | 231 Count | 694 Count | 219 Count | 4.09 VDC | 0 VDC |
| 1779445117 | 205 Count | 608 Count | 194 Count | 4.09 VDC | 0 VDC |
| 1779443324 | 183 Count | 543 Count | 177 Count | 4.08 VDC | 0 VDC |
| 1779441524 | 156 Count | 459 Count | 151 Count | 4.11 VDC | 0 VDC |
| 1779439723 | 110 Count | 341 Count | 106 Count | 4.08 VDC | 0 VDC |
| 1779437922 | 82 Count | 263 Count | 79 Count | 4.12 VDC | 0 VDC |
| 1779436121 | 52 Count | 189 Count | 50 Count | 4.08 VDC | 0 VDC |
| 1779434321 | 31 Count | 126 Count | 30 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)