This is the latest recevied telemetry packets stored in our database for station/object SA2KLM-97. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1762817281 | 4.19 VDC | 23.4 C | 36.14 % | 1012.75 hPa | 0 |
| 1762809340 | 4.09 VDC | 22.1 C | 37.53 % | 1011.5 hPa | 0 |
| 1762800309 | 4.1 VDC | 21.8 C | 37.75 % | 1008.88 hPa | 0 |
| 1762793731 | 4.11 VDC | 21.7 C | 38.19 % | 1011.75 hPa | 0 |
| 1762788960 | 4.12 VDC | 21.9 C | 37.17 % | 1010.38 hPa | 0 |
| 1762784426 | 4.14 VDC | 21.9 C | 37.22 % | 1012.13 hPa | 0 |
| 1762781136 | 4.15 VDC | 22 C | 37.19 % | 1012.38 hPa | 0 |
| 1762773063 | 4.17 VDC | 21.8 C | 36.36 % | 1013 hPa | 0 |
| 1762764032 | 4.09 VDC | 21.2 C | 37.49 % | 1013.13 hPa | 0 |
| 1762756854 | 4.09 VDC | 21.5 C | 37.62 % | 1016 hPa | 0 |
| 1762748696 | 4.1 VDC | 21.5 C | 37.21 % | 1012.75 hPa | 0 |
| 1762745489 | 4.11 VDC | 21.6 C | 37.2 % | 1013.88 hPa | 0 |
| 1762738746 | 4.12 VDC | 21.7 C | 36.99 % | 1009.75 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)