This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795360353 | 7 Count | 107 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1795359452 | 6 Count | 96 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1795358552 | 5 Count | 87 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795357651 | 4 Count | 78 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1795356750 | 3 Count | 68 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795355849 | 2 Count | 59 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1795354948 | 1 Count | 50 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795354048 | 0 Count | 12 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1795353147 | 104 Count | 1002 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1795352246 | 103 Count | 993 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1795351345 | 102 Count | 985 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795350444 | 101 Count | 975 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795349543 | 100 Count | 966 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1795348642 | 99 Count | 955 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795347741 | 98 Count | 945 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795346841 | 97 Count | 935 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1795345940 | 96 Count | 924 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1795345039 | 95 Count | 912 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795344138 | 94 Count | 903 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1795343238 | 93 Count | 897 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1795342337 | 92 Count | 889 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1795341436 | 91 Count | 882 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795340535 | 90 Count | 873 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1795339634 | 89 Count | 863 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795338734 | 88 Count | 853 Count | 0 Count | 4.23 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)