This is the latest recevied telemetry packets stored in our database for station/object SZ1SV-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771571821 | 600 Count | 296 Count | 162 Count | 4.21 VDC | 0 VDC |
| 1771571218 | 599 Count | 296 Count | 162 Count | 4.2 VDC | 0 VDC |
| 1771570615 | 598 Count | 296 Count | 162 Count | 4.18 VDC | 0 VDC |
| 1771570011 | 597 Count | 296 Count | 162 Count | 4.2 VDC | 0 VDC |
| 1771569408 | 596 Count | 296 Count | 162 Count | 4.18 VDC | 0 VDC |
| 1771568804 | 595 Count | 296 Count | 162 Count | 4.15 VDC | 0 VDC |
| 1771568201 | 594 Count | 296 Count | 162 Count | 4.21 VDC | 0 VDC |
| 1771567598 | 593 Count | 296 Count | 162 Count | 4.21 VDC | 0 VDC |
| 1771566994 | 592 Count | 296 Count | 162 Count | 4.16 VDC | 0 VDC |
| 1771566391 | 591 Count | 296 Count | 162 Count | 4.18 VDC | 0 VDC |
| 1771565787 | 590 Count | 296 Count | 162 Count | 4.19 VDC | 0 VDC |
| 1771565184 | 589 Count | 296 Count | 162 Count | 4.14 VDC | 0 VDC |
| 1771564581 | 588 Count | 296 Count | 162 Count | 4.17 VDC | 0 VDC |
| 1771563977 | 587 Count | 296 Count | 162 Count | 4.22 VDC | 0 VDC |
| 1771563374 | 586 Count | 296 Count | 162 Count | 4.16 VDC | 0 VDC |
| 1771562770 | 585 Count | 296 Count | 162 Count | 4.16 VDC | 0 VDC |
| 1771562288 | 584 Count | 296 Count | 162 Count | 4.18 VDC | 0 VDC |
| 1771561685 | 583 Count | 296 Count | 162 Count | 4.18 VDC | 0 VDC |
| 1771561081 | 582 Count | 296 Count | 162 Count | 4.18 VDC | 0 VDC |
| 1771560478 | 581 Count | 296 Count | 162 Count | 4.14 VDC | 0 VDC |
| 1771559875 | 580 Count | 296 Count | 162 Count | 4.21 VDC | 0 VDC |
| 1771559271 | 579 Count | 296 Count | 162 Count | 4.19 VDC | 0 VDC |
| 1771558668 | 578 Count | 296 Count | 162 Count | 4.19 VDC | 0 VDC |
| 1771558064 | 577 Count | 296 Count | 162 Count | 4.15 VDC | 0 VDC |
| 1771557461 | 576 Count | 296 Count | 162 Count | 4.16 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)