This is the latest recevied telemetry packets stored in our database for station/object F6DEV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX_rate* | RelRate* | DrpRate* | Value5* |
|---|---|---|---|---|---|
| 1791445852 | 4.24 VDC | 236 pkt/h | 16 pkt/h | 220 pkt/h | 0 |
| 1791444052 | 4.23 VDC | 68 pkt/h | 8 pkt/h | 60 pkt/h | 0 |
| 1791443152 | 4.24 VDC | 84 pkt/h | 8 pkt/h | 76 pkt/h | 0 |
| 1791442252 | 4.23 VDC | 60 pkt/h | 12 pkt/h | 48 pkt/h | 0 |
| 1791441352 | 4.23 VDC | 52 pkt/h | 8 pkt/h | 44 pkt/h | 0 |
| 1791440452 | 4.23 VDC | 44 pkt/h | 4 pkt/h | 40 pkt/h | 0 |
| 1791439551 | 4.23 VDC | 60 pkt/h | 8 pkt/h | 52 pkt/h | 0 |
| 1791438651 | 4.23 VDC | 72 pkt/h | 8 pkt/h | 64 pkt/h | 0 |
| 1791437750 | 4.23 VDC | 52 pkt/h | 4 pkt/h | 48 pkt/h | 0 |
| 1791436850 | 4.24 VDC | 48 pkt/h | 8 pkt/h | 40 pkt/h | 0 |
| 1791435950 | 4.23 VDC | 96 pkt/h | 8 pkt/h | 88 pkt/h | 0 |
| 1791435050 | 4.23 VDC | 72 pkt/h | 8 pkt/h | 64 pkt/h | 0 |
| 1791434150 | 4.23 VDC | 72 pkt/h | 4 pkt/h | 68 pkt/h | 0 |
| 1791433250 | 4.23 VDC | 60 pkt/h | 8 pkt/h | 52 pkt/h | 0 |
| 1791432349 | 4.23 VDC | 78 pkt/h | 4 pkt/h | 74 pkt/h | 0 |
| 1791429627 | 4.23 VDC | 52 pkt/h | 8 pkt/h | 44 pkt/h | 0 |
| 1791428726 | 4.23 VDC | 76 pkt/h | 4 pkt/h | 72 pkt/h | 0 |
| 1791427826 | 4.23 VDC | 72 pkt/h | 12 pkt/h | 60 pkt/h | 0 |
| 1791426926 | 4.23 VDC | 80 pkt/h | 12 pkt/h | 68 pkt/h | 0 |
| 1791426026 | 4.24 VDC | 80 pkt/h | 8 pkt/h | 72 pkt/h | 0 |
| 1791425126 | 4.24 VDC | 60 pkt/h | 4 pkt/h | 56 pkt/h | 0 |
| 1791424226 | 4.23 VDC | 64 pkt/h | 12 pkt/h | 52 pkt/h | 0 |
| 1791421524 | 4.24 VDC | 64 pkt/h | 12 pkt/h | 52 pkt/h | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)