This is the latest recevied telemetry packets stored in our database for station/object EB5CGD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771576213 | 0 Count | 985 Count | 0 Count | 0 VDC | 0 VDC |
| 1771574953 | 0 Count | 983 Count | 0 Count | 0 VDC | 0 VDC |
| 1771573693 | 0 Count | 949 Count | 0 Count | 0 VDC | 0 VDC |
| 1771572433 | 0 Count | 947 Count | 0 Count | 0 VDC | 0 VDC |
| 1771571173 | 0 Count | 946 Count | 0 Count | 0 VDC | 0 VDC |
| 1771569913 | 0 Count | 946 Count | 0 Count | 0 VDC | 0 VDC |
| 1771568653 | 0 Count | 928 Count | 0 Count | 0 VDC | 0 VDC |
| 1771567393 | 0 Count | 881 Count | 0 Count | 0 VDC | 0 VDC |
| 1771566133 | 0 Count | 832 Count | 0 Count | 0 VDC | 0 VDC |
| 1771564873 | 0 Count | 826 Count | 0 Count | 0 VDC | 0 VDC |
| 1771563613 | 0 Count | 825 Count | 0 Count | 0 VDC | 0 VDC |
| 1771537342 | 0 Count | 825 Count | 0 Count | 0 VDC | 0 VDC |
| 1771536082 | 0 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
| 1771534822 | 0 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
| 1771533562 | 0 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1771532302 | 0 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1771531042 | 0 Count | 806 Count | 0 Count | 0 VDC | 0 VDC |
| 1771529782 | 0 Count | 803 Count | 0 Count | 0 VDC | 0 VDC |
| 1771528522 | 0 Count | 802 Count | 0 Count | 0 VDC | 0 VDC |
| 1771527261 | 0 Count | 797 Count | 0 Count | 0 VDC | 0 VDC |
| 1771526001 | 0 Count | 776 Count | 0 Count | 0 VDC | 0 VDC |
| 1771524741 | 0 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1771523481 | 0 Count | 758 Count | 0 Count | 0 VDC | 0 VDC |
| 1771522221 | 0 Count | 757 Count | 0 Count | 0 VDC | 0 VDC |
| 1771520961 | 0 Count | 757 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)