This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787543314 | 91 Count | 854 Count | 0 Count | 4 VDC | 0 VDC |
| 1787541514 | 87 Count | 818 Count | 0 Count | 4 VDC | 0 VDC |
| 1787539713 | 83 Count | 784 Count | 0 Count | 4 VDC | 0 VDC |
| 1787536128 | 71 Count | 717 Count | 0 Count | 4 VDC | 0 VDC |
| 1787534327 | 67 Count | 680 Count | 0 Count | 4 VDC | 0 VDC |
| 1787532525 | 63 Count | 633 Count | 0 Count | 4 VDC | 0 VDC |
| 1787530724 | 58 Count | 591 Count | 0 Count | 4 VDC | 0 VDC |
| 1787528924 | 54 Count | 548 Count | 0 Count | 4 VDC | 0 VDC |
| 1787527123 | 50 Count | 512 Count | 0 Count | 4 VDC | 0 VDC |
| 1787525322 | 46 Count | 457 Count | 0 Count | 4 VDC | 0 VDC |
| 1787523522 | 42 Count | 409 Count | 0 Count | 4 VDC | 0 VDC |
| 1787521721 | 38 Count | 361 Count | 0 Count | 4 VDC | 0 VDC |
| 1787519920 | 34 Count | 324 Count | 0 Count | 4 VDC | 0 VDC |
| 1787518120 | 30 Count | 286 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1787516319 | 23 Count | 244 Count | 0 Count | 4 VDC | 0 VDC |
| 1787514518 | 19 Count | 207 Count | 0 Count | 4 VDC | 0 VDC |
| 1787512718 | 15 Count | 165 Count | 0 Count | 4 VDC | 0 VDC |
| 1787510917 | 11 Count | 121 Count | 0 Count | 4 VDC | 0 VDC |
| 1787509116 | 7 Count | 83 Count | 0 Count | 4 VDC | 0 VDC |
| 1787507316 | 3 Count | 48 Count | 0 Count | 4 VDC | 0 VDC |
| 1787505515 | 105 Count | 1044 Count | 0 Count | 4 VDC | 0 VDC |
| 1787501914 | 94 Count | 931 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1787500113 | 90 Count | 880 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1787498312 | 85 Count | 834 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1787496512 | 81 Count | 784 Count | 0 Count | 4.01 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)