This is the latest recevied telemetry packets stored in our database for station/object F4GCF-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX_rate* | RelRate* | DrpRate* | Value5* |
|---|---|---|---|---|---|
| 1795360944 | 4.2 VDC | 141 pkt/h | 45 pkt/h | 96 pkt/h | 0 |
| 1795359744 | 4.19 VDC | 63 pkt/h | 30 pkt/h | 33 pkt/h | 0 |
| 1795357343 | 4.19 VDC | 42 pkt/h | 33 pkt/h | 9 pkt/h | 0 |
| 1795356143 | 4.18 VDC | 36 pkt/h | 18 pkt/h | 18 pkt/h | 0 |
| 1795353743 | 4.18 VDC | 54 pkt/h | 36 pkt/h | 18 pkt/h | 0 |
| 1795348942 | 4.19 VDC | 42 pkt/h | 18 pkt/h | 24 pkt/h | 0 |
| 1795347742 | 4.19 VDC | 45 pkt/h | 33 pkt/h | 12 pkt/h | 0 |
| 1795346542 | 4.2 VDC | 63 pkt/h | 42 pkt/h | 21 pkt/h | 0 |
| 1795345342 | 4.2 VDC | 57 pkt/h | 33 pkt/h | 24 pkt/h | 0 |
| 1795341719 | 4.19 VDC | 51 pkt/h | 24 pkt/h | 27 pkt/h | 0 |
| 1795340519 | 4.19 VDC | 51 pkt/h | 18 pkt/h | 33 pkt/h | 0 |
| 1795339319 | 4.18 VDC | 69 pkt/h | 27 pkt/h | 42 pkt/h | 0 |
| 1795338119 | 4.2 VDC | 42 pkt/h | 18 pkt/h | 24 pkt/h | 0 |
| 1795336919 | 4.19 VDC | 45 pkt/h | 15 pkt/h | 30 pkt/h | 0 |
| 1795335719 | 4.19 VDC | 60 pkt/h | 24 pkt/h | 36 pkt/h | 0 |
| 1795334518 | 4.19 VDC | 114 pkt/h | 45 pkt/h | 69 pkt/h | 0 |
| 1795333318 | 4.2 VDC | 141 pkt/h | 51 pkt/h | 90 pkt/h | 0 |
| 1795330918 | 4.19 VDC | 51 pkt/h | 27 pkt/h | 24 pkt/h | 0 |
| 1795329718 | 4.19 VDC | 54 pkt/h | 24 pkt/h | 30 pkt/h | 0 |
| 1795328517 | 4.2 VDC | 48 pkt/h | 30 pkt/h | 18 pkt/h | 0 |
| 1795326117 | 4.19 VDC | 60 pkt/h | 24 pkt/h | 36 pkt/h | 0 |
| 1795321297 | 4.19 VDC | 54 pkt/h | 36 pkt/h | 18 pkt/h | 0 |
| 1795320097 | 4.19 VDC | 60 pkt/h | 39 pkt/h | 21 pkt/h | 0 |
| 1795317697 | 4.18 VDC | 60 pkt/h | 30 pkt/h | 30 pkt/h | 0 |
| 1795316496 | 4.19 VDC | 75 pkt/h | 45 pkt/h | 30 pkt/h | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)