EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

HS9BZG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1766757114	32.34 °C	42.8 %RH	992.7 hPa	4.16 V
1766756514	32.42 °C	42.7 %RH	992.6 hPa	4.16 V
1766755914	32.55 °C	42.5 %RH	992.5 hPa	4.16 V
1766755314	32.54 °C	42.5 %RH	992.4 hPa	4.16 V
1766754714	31.92 °C	43.1 %RH	992.3 hPa	4.15 V
1766754114	31.73 °C	42.8 %RH	992.2 hPa	4.09 V
1766753514	31.96 °C	42.2 %RH	992.1 hPa	4.09 V
1766752914	32.38 °C	41.6 %RH	991.9 hPa	4.12 V
1766752314	32.79 °C	41 %RH	991.7 hPa	4.16 V
1766751738	32.94 °C	40.5 %RH	991.5 hPa	4.16 V
1766751114	33.2 °C	39.9 %RH	991.3 hPa	4.16 V
1766750514	33.47 °C	39.3 %RH	991.2 hPa	4.16 V
1766749914	33.77 °C	38.6 %RH	991.1 hPa	4.16 V
1766749314	34.14 °C	37.8 %RH	990.9 hPa	4.16 V
1766748714	34.59 °C	37 %RH	990.8 hPa	4.16 V
1766748114	35.1 °C	36.4 %RH	990.7 hPa	4.16 V
1766747514	35.72 °C	35.8 %RH	990.7 hPa	4.16 V
1766746914	36.56 °C	34.5 %RH	990.6 hPa	4.16 V
1766746314	37.53 °C	33.5 %RH	990.5 hPa	4.16 V
1766745714	38.01 °C	32.8 %RH	990.4 hPa	4.16 V
1766745114	39.73 °C	31 %RH	990.3 hPa	4.1 V
1766744514	41.73 °C	29.4 %RH	990.2 hPa	4.11 V
1766743914	43.18 °C	28.4 %RH	990.1 hPa	4.14 V
1766743314	43.77 °C	28.1 %RH	990 hPa	4.16 V
1766742114	45.55 °C	26.9 %RH	989.8 hPa	4.16 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)