This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satellite* | HDOP* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795374437 | 5 | 2 | 0 | 0 | 0 |
| 1795373537 | 4 | 2 | 0 | 0 | 0 |
| 1795372637 | 0 | 2 | 0 | 0 | 0 |
| 1795371737 | 4 | 25 | 0 | 0 | 0 |
| 1795370837 | 4 | 8 | 0 | 0 | 0 |
| 1795369937 | 0 | 23 | 0 | 0 | 0 |
| 1795369037 | 3 | 23 | 0 | 0 | 0 |
| 1795368137 | 6 | 2 | 0 | 0 | 0 |
| 1795367237 | 5 | 2 | 0 | 0 | 0 |
| 1795366337 | 5 | 2 | 0 | 0 | 0 |
| 1795365437 | 5 | 2 | 0 | 0 | 0 |
| 1795364537 | 0 | 2 | 0 | 0 | 0 |
| 1795363637 | 4 | 2 | 0 | 0 | 0 |
| 1795362737 | 6 | 1 | 0 | 0 | 0 |
| 1795361821 | 5 | 2 | 0 | 0 | 0 |
| 1795360921 | 0 | 3 | 0 | 0 | 0 |
| 1795360021 | 5 | 1 | 0 | 0 | 0 |
| 1795359121 | 0 | 3 | 0 | 0 | 0 |
| 1795358221 | 0 | 3 | 0 | 0 | 0 |
| 1795357321 | 0 | 3 | 0 | 0 | 0 |
| 1795356421 | 0 | 3 | 0 | 0 | 0 |
| 1795355521 | 6 | 1 | 0 | 0 | 0 |
| 1795354621 | 5 | 3 | 0 | 0 | 0 |
| 1795353721 | 0 | 25 | 0 | 0 | 0 |
| 1795352821 | 4 | 13 | 0 | 0 | 0 |
*Used Equation Coefficients:
Satellite: 0, 1, 0
HDOP: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)