This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771561387 | 0 Count | 280 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771561087 | 0 Count | 271 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771560787 | 0 Count | 265 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771560487 | 0 Count | 256 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771560187 | 0 Count | 249 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771559887 | 0 Count | 241 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1771559587 | 0 Count | 232 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771559287 | 0 Count | 223 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771558986 | 0 Count | 214 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1771558686 | 0 Count | 206 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1771558386 | 0 Count | 197 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771558086 | 0 Count | 189 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771557786 | 0 Count | 180 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771557486 | 0 Count | 173 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1771557186 | 0 Count | 168 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771556886 | 0 Count | 162 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771556586 | 0 Count | 155 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771556286 | 0 Count | 150 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771555986 | 0 Count | 142 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1771555685 | 0 Count | 136 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771555385 | 0 Count | 131 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1771555085 | 0 Count | 125 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1771554785 | 0 Count | 116 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771554491 | 0 Count | 112 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771554190 | 0 Count | 106 Count | 0 Count | 4.5 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)