This is the latest recevied telemetry packets stored in our database for station/object EA4GEL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783299678 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1783298778 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1783297878 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1783296978 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1783296078 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1783295177 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1783294277 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1783293377 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1783292477 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1783291577 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1783290676 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1783289776 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1783288875 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1783287975 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1783287075 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1783286174 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1783285274 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1783284374 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1783283474 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1783282573 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1783281673 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1783280773 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1783279873 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1783278973 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1783278072 | 4.23 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)