This is the latest recevied telemetry packets stored in our database for station/object F4IQU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762793671 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1762792057 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1762790446 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1762788831 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1762787213 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1762785598 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1762783979 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1762782363 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1762780747 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1762779130 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1762777513 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1762775900 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1762774282 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1762772664 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1762771048 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1762769434 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1762767819 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1762766207 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1762764591 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1762762975 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1762761361 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1762759743 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1762758129 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1762756513 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1762754897 | 4.1 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)