This is the latest recevied telemetry packets stored in our database for station/object G0AKH-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795357873 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1795356972 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1795356072 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1795355172 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795354271 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795353371 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1795352470 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1795351569 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795350668 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795349767 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795348867 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795347967 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795347066 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795346166 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795345266 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1795344366 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1795343466 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795342565 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795341665 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795340765 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1795339865 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1795338965 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1795338064 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1795337164 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1795336264 | 3.71 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)