This is the latest recevied telemetry packets stored in our database for station/object KE6VDW-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758398756 | 0.36 VDC | 0 | 0 | 0 | 0 |
| 1758397856 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758396956 | 0.32 VDC | 0 | 0 | 0 | 0 |
| 1758396056 | 0.32 VDC | 0 | 0 | 0 | 0 |
| 1758395155 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758394255 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758393355 | 0.37 VDC | 0 | 0 | 0 | 0 |
| 1758392454 | 0.46 VDC | 0 | 0 | 0 | 0 |
| 1758330317 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758330228 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758329659 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758329253 | 0.3 VDC | 0 | 0 | 0 | 0 |
| 1758328353 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758327451 | 0.34 VDC | 0 | 0 | 0 | 0 |
| 1758327316 | 0.3 VDC | 0 | 0 | 0 | 0 |
| 1758326966 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758326653 | 0.3 VDC | 0 | 0 | 0 | 0 |
| 1758325494 | 0.3 VDC | 0 | 0 | 0 | 0 |
| 1758325007 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758320180 | 0.34 VDC | 0 | 0 | 0 | 0 |
| 1758319862 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758318962 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758318062 | 0.31 VDC | 0 | 0 | 0 | 0 |
| 1758317161 | 0.32 VDC | 0 | 0 | 0 | 0 |
| 1758316261 | 0.31 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)