This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758405279 | 88 Count | 395 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1758403476 | 87 Count | 388 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1758401673 | 86 Count | 381 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1758399870 | 85 Count | 374 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1758398067 | 84 Count | 367 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1758396265 | 83 Count | 360 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1758394462 | 82 Count | 353 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1758392659 | 81 Count | 346 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1758390856 | 80 Count | 331 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1758389054 | 79 Count | 316 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1758387251 | 78 Count | 309 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1758385448 | 77 Count | 303 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1758383679 | 72 Count | 294 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1758381876 | 71 Count | 287 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1758380073 | 70 Count | 280 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1758378271 | 69 Count | 273 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1758376467 | 68 Count | 266 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1758329660 | 34 Count | 202 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1758327857 | 33 Count | 196 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1758326054 | 32 Count | 189 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1758324251 | 31 Count | 174 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1758322448 | 30 Count | 167 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1758320645 | 29 Count | 160 Count | 0 Count | 4.25 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)