This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787508041 | 295 Count | 799 Count | 217 Count | 4.31 VDC | 0.14 VDC |
| 1787507739 | 294 Count | 789 Count | 217 Count | 4.27 VDC | 0.14 VDC |
| 1787507132 | 290 Count | 773 Count | 215 Count | 4.28 VDC | 0.14 VDC |
| 1787506830 | 289 Count | 765 Count | 215 Count | 4.3 VDC | 0.14 VDC |
| 1787506527 | 288 Count | 759 Count | 215 Count | 4.31 VDC | 0.14 VDC |
| 1787505921 | 284 Count | 744 Count | 213 Count | 4.3 VDC | 0.14 VDC |
| 1787505620 | 283 Count | 737 Count | 213 Count | 4.27 VDC | 0.14 VDC |
| 1787505315 | 280 Count | 723 Count | 211 Count | 4.27 VDC | 0.14 VDC |
| 1787505012 | 279 Count | 713 Count | 211 Count | 4.3 VDC | 0.14 VDC |
| 1787504708 | 259 Count | 684 Count | 192 Count | 4.31 VDC | 0.14 VDC |
| 1787504102 | 255 Count | 662 Count | 190 Count | 4.3 VDC | 0.14 VDC |
| 1787503799 | 254 Count | 653 Count | 190 Count | 4.25 VDC | 0.14 VDC |
| 1787503496 | 251 Count | 638 Count | 188 Count | 4.29 VDC | 0.14 VDC |
| 1787503193 | 250 Count | 632 Count | 188 Count | 4.31 VDC | 0.14 VDC |
| 1787502890 | 249 Count | 624 Count | 188 Count | 4.27 VDC | 0.14 VDC |
| 1787502588 | 246 Count | 618 Count | 186 Count | 4.26 VDC | 0.14 VDC |
| 1787502285 | 245 Count | 613 Count | 186 Count | 4.3 VDC | 0.14 VDC |
| 1787501679 | 238 Count | 593 Count | 182 Count | 4.28 VDC | 0.14 VDC |
| 1787501376 | 231 Count | 582 Count | 179 Count | 4.26 VDC | 0.14 VDC |
| 1787500771 | 219 Count | 545 Count | 169 Count | 4.3 VDC | 0.14 VDC |
| 1787500468 | 218 Count | 534 Count | 169 Count | 4.25 VDC | 0.14 VDC |
| 1787500165 | 215 Count | 525 Count | 167 Count | 4.26 VDC | 0.14 VDC |
| 1787499862 | 214 Count | 512 Count | 167 Count | 4.3 VDC | 0.14 VDC |
| 1787499257 | 211 Count | 495 Count | 166 Count | 4.29 VDC | 0.14 VDC |
| 1787498955 | 210 Count | 489 Count | 166 Count | 4.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)