This is the latest recevied telemetry packets stored in our database for station/object IT9AKQ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787547345 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1787545545 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1787543745 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1787541944 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1787540310 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1787536547 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1787534747 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1787532947 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1787531147 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1787529347 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1787527547 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1787525747 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1787523946 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1787522146 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1787520346 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1787518546 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1787516746 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1787514945 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1787513145 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1787511345 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1787509545 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1787505945 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1787504145 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1787502344 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1787500544 | 4.16 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)