This is the latest recevied telemetry packets stored in our database for station/object EA8EE-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1766732188 | 25.98 °C | 35 %RH | 828 hPa | 4.16 V | 12 |
| 1766731794 | 26.04 °C | 35 %RH | 828 hPa | 4.16 V | 14 |
| 1766731455 | 25.95 °C | 35.2 %RH | 828 hPa | 4.17 V | 14 |
| 1766731425 | 25.95 °C | 35.2 %RH | 828 hPa | 4.16 V | 14 |
| 1766731118 | 26.02 °C | 35.1 %RH | 828 hPa | 4.16 V | 15 |
| 1766730523 | 25.96 °C | 35.3 %RH | 828 hPa | 4.16 V | 13 |
| 1766730471 | 25.96 °C | 35.2 %RH | 828 hPa | 4.17 V | 14 |
| 1766730429 | 25.96 °C | 35.1 %RH | 828 hPa | 4.16 V | 13 |
| 1766730246 | 26.02 °C | 35 %RH | 828 hPa | 4.16 V | 15 |
| 1766730236 | 26.02 °C | 35 %RH | 828 hPa | 4.16 V | 14 |
| 1766729622 | 25.98 °C | 35.2 %RH | 828 hPa | 4.16 V | 15 |
| 1766729383 | 26.04 °C | 35.1 %RH | 828 hPa | 4.16 V | 14 |
| 1766728796 | 26.06 °C | 35.2 %RH | 828 hPa | 4.16 V | 12 |
| 1766728703 | 26.06 °C | 35.2 %RH | 828 hPa | 4.17 V | 13 |
| 1766728084 | 26.17 °C | 35 %RH | 828 hPa | 4.16 V | 13 |
| 1766727929 | 26.13 °C | 35.1 %RH | 828 hPa | 4.17 V | 12 |
| 1766727826 | 26.13 °C | 35.1 %RH | 828 hPa | 4.16 V | 15 |
| 1766727412 | 26.21 °C | 35 %RH | 828 hPa | 4.16 V | 14 |
| 1766726792 | 26.19 °C | 35.1 %RH | 828 hPa | 4.95 V | 15 |
| 1766726444 | 26.23 °C | 35.2 %RH | 828 hPa | 4.16 V | 13 |
| 1766726364 | 26.28 °C | 35 %RH | 828 hPa | 4.16 V | 11 |
| 1766725809 | 26.34 °C | 35.1 %RH | 828 hPa | 4.17 V | 14 |
| 1766725196 | 26.26 °C | 35.4 %RH | 828 hPa | 4.17 V | 13 |
| 1766725133 | 26.22 °C | 35.4 %RH | 828 hPa | 4.17 V | 12 |
| 1766725124 | 26.22 °C | 35.4 %RH | 828 hPa | 4.16 V | 13 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 0
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)