This is the latest recevied telemetry packets stored in our database for station/object EA4ENG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762811450 | 205 Count | 69 Count | 68 Count | 3.78 VDC | 0 VDC |
| 1762809643 | 200 Count | 66 Count | 65 Count | 3.78 VDC | 0 VDC |
| 1762807836 | 193 Count | 61 Count | 60 Count | 3.79 VDC | 0 VDC |
| 1762806029 | 189 Count | 59 Count | 58 Count | 3.79 VDC | 0 VDC |
| 1762804222 | 181 Count | 53 Count | 52 Count | 3.76 VDC | 0 VDC |
| 1762802414 | 177 Count | 51 Count | 50 Count | 3.79 VDC | 0 VDC |
| 1762800606 | 175 Count | 51 Count | 50 Count | 3.8 VDC | 0 VDC |
| 1762798799 | 171 Count | 49 Count | 48 Count | 3.79 VDC | 0 VDC |
| 1762796992 | 168 Count | 48 Count | 47 Count | 3.81 VDC | 0 VDC |
| 1762795185 | 165 Count | 47 Count | 46 Count | 3.81 VDC | 0 VDC |
| 1762793377 | 162 Count | 46 Count | 45 Count | 3.8 VDC | 0 VDC |
| 1762791570 | 159 Count | 45 Count | 44 Count | 3.82 VDC | 0 VDC |
| 1762789763 | 156 Count | 44 Count | 43 Count | 3.83 VDC | 0 VDC |
| 1762787956 | 154 Count | 44 Count | 43 Count | 3.84 VDC | 0 VDC |
| 1762786149 | 152 Count | 44 Count | 43 Count | 3.84 VDC | 0 VDC |
| 1762784342 | 150 Count | 44 Count | 43 Count | 3.84 VDC | 0 VDC |
| 1762782535 | 146 Count | 42 Count | 41 Count | 3.89 VDC | 0 VDC |
| 1762780728 | 144 Count | 42 Count | 41 Count | 3.88 VDC | 0 VDC |
| 1762778921 | 141 Count | 41 Count | 40 Count | 3.83 VDC | 0 VDC |
| 1762777114 | 139 Count | 41 Count | 40 Count | 3.83 VDC | 0 VDC |
| 1762775306 | 135 Count | 39 Count | 38 Count | 3.82 VDC | 0 VDC |
| 1762773499 | 133 Count | 39 Count | 38 Count | 3.78 VDC | 0 VDC |
| 1762771692 | 130 Count | 38 Count | 37 Count | 3.78 VDC | 0 VDC |
| 1762769884 | 128 Count | 38 Count | 37 Count | 3.72 VDC | 0 VDC |
| 1762768077 | 125 Count | 37 Count | 36 Count | 3.69 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)