This is the latest recevied telemetry packets stored in our database for station/object M7AQH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766779647 | 21.25 C | 57.01 % | 1628 hPa | 0 | 0 |
| 1766779047 | 21.29 C | 56.96 % | 1628 hPa | 0 | 0 |
| 1766778447 | 21.31 C | 57.11 % | 1628 hPa | 0 | 0 |
| 1766777847 | 21.29 C | 56.89 % | 1628 hPa | 0 | 0 |
| 1766777247 | 21.19 C | 56.41 % | 1628 hPa | 0 | 0 |
| 1766776647 | 20.98 C | 56.31 % | 1628 hPa | 0 | 0 |
| 1766776047 | 20.77 C | 56.5 % | 1628 hPa | 0 | 0 |
| 1766775447 | 20.45 C | 56.91 % | 1628 hPa | 0 | 0 |
| 1766774847 | 20.03 C | 57.36 % | 1628 hPa | 0 | 0 |
| 1766774247 | 19.53 C | 58.44 % | 1628 hPa | 0 | 0 |
| 1766773647 | 18.89 C | 57.83 % | 1628 hPa | 0 | 0 |
| 1766773047 | 18.8 C | 56.69 % | 1628 hPa | 0 | 0 |
| 1766772447 | 18.95 C | 56.67 % | 1628 hPa | 0 | 0 |
| 1766771849 | 19.14 C | 56.64 % | 1628 hPa | 0 | 0 |
| 1766771247 | 19.45 C | 56.69 % | 1628 hPa | 0 | 0 |
| 1766770646 | 19.78 C | 56.63 % | 1628 hPa | 0 | 0 |
| 1766770049 | 20.01 C | 56.92 % | 1628 hPa | 0 | 0 |
| 1766769446 | 20.25 C | 56.97 % | 1628 hPa | 0 | 0 |
| 1766768846 | 20.47 C | 56.7 % | 1628 hPa | 0 | 0 |
| 1766768246 | 20.75 C | 56.53 % | 1628 hPa | 0 | 0 |
| 1766767646 | 20.92 C | 56.81 % | 1628 hPa | 0 | 0 |
| 1766767051 | 20.82 C | 57.02 % | 1628 hPa | 0 | 0 |
| 1766766448 | 20.67 C | 57.12 % | 1628 hPa | 0 | 0 |
| 1766765848 | 20.45 C | 57.63 % | 1628 hPa | 0 | 0 |
| 1766765246 | 20.1 C | 58.08 % | 1628 hPa | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)