This is the latest recevied telemetry packets stored in our database for station/object WB0RZS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758411181 | 0 | 0 | 0 | 0 | 0 |
| 1758409381 | 0 | 0 | 0 | 0 | 0 |
| 1758407580 | 0 | 0 | 0 | 0 | 0 |
| 1758405778 | 0 | 0 | 0 | 0 | 0 |
| 1758403979 | 0 | 0 | 0 | 0 | 0 |
| 1758400378 | 0 | 0 | 0 | 0 | 0 |
| 1758398577 | 0 | 0 | 0 | 0 | 0 |
| 1758396776 | 0 | 0 | 0 | 0 | 0 |
| 1758387767 | 0 | 0 | 0 | 0 | 0 |
| 1758385965 | 0 | 0 | 0 | 0 | 0 |
| 1758382362 | 0 | 0 | 0 | 0 | 0 |
| 1758380560 | 0 | 0 | 0 | 0 | 0 |
| 1758378758 | 0 | 0 | 0 | 0 | 0 |
| 1758376956 | 0 | 0 | 0 | 0 | 0 |
| 1758373348 | 0 | 0 | 0 | 0 | 0 |
| 1758371542 | 0 | 0 | 0 | 0 | 0 |
| 1758369739 | 0 | 0 | 0 | 0 | 0 |
| 1758366147 | 0 | 0 | 0 | 0 | 0 |
| 1758362533 | 0 | 0 | 0 | 0 | 0 |
| 1758360732 | 0 | 0 | 0 | 0 | 0 |
| 1758358930 | 0 | 0 | 0 | 0 | 0 |
| 1758357128 | 0 | 0 | 0 | 0 | 0 |
| 1758355328 | 0 | 0 | 0 | 0 | 0 |
| 1758353526 | 0 | 0 | 0 | 0 | 0 |
| 1758351725 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)