This is the latest recevied telemetry packets stored in our database for station/object IQ9DM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762834476 | 136 Count | 516 Count | 117 Count | 4.16 VDC | 0 VDC |
| 1762832672 | 129 Count | 491 Count | 111 Count | 4.18 VDC | 0 VDC |
| 1762830869 | 122 Count | 464 Count | 105 Count | 4.18 VDC | 0 VDC |
| 1762829107 | 116 Count | 450 Count | 100 Count | 4.22 VDC | 0 VDC |
| 1762827304 | 109 Count | 423 Count | 94 Count | 4.16 VDC | 0 VDC |
| 1762825501 | 97 Count | 398 Count | 83 Count | 4.18 VDC | 0 VDC |
| 1762823697 | 89 Count | 380 Count | 76 Count | 4.17 VDC | 0 VDC |
| 1762821894 | 81 Count | 359 Count | 69 Count | 4.16 VDC | 0 VDC |
| 1762820090 | 73 Count | 340 Count | 62 Count | 4.21 VDC | 0 VDC |
| 1762818287 | 65 Count | 321 Count | 55 Count | 4.14 VDC | 0 VDC |
| 1762816483 | 57 Count | 293 Count | 48 Count | 4.15 VDC | 0 VDC |
| 1762814679 | 53 Count | 263 Count | 45 Count | 4.21 VDC | 0 VDC |
| 1762812876 | 49 Count | 235 Count | 42 Count | 4.2 VDC | 0 VDC |
| 1762811073 | 45 Count | 208 Count | 39 Count | 4.17 VDC | 0 VDC |
| 1762809269 | 41 Count | 181 Count | 36 Count | 4.16 VDC | 0 VDC |
| 1762807505 | 37 Count | 150 Count | 33 Count | 4.18 VDC | 0 VDC |
| 1762805702 | 28 Count | 120 Count | 25 Count | 4.12 VDC | 0 VDC |
| 1762803898 | 22 Count | 86 Count | 20 Count | 4.12 VDC | 0 VDC |
| 1762802095 | 14 Count | 58 Count | 13 Count | 4.15 VDC | 0 VDC |
| 1762800292 | 7 Count | 30 Count | 7 Count | 4.21 VDC | 0 VDC |
| 1762798488 | 492 Count | 1021 Count | 425 Count | 4.14 VDC | 0 VDC |
| 1762796685 | 485 Count | 991 Count | 419 Count | 4.16 VDC | 0 VDC |
| 1762794882 | 477 Count | 959 Count | 412 Count | 4.13 VDC | 0 VDC |
| 1762793078 | 468 Count | 927 Count | 404 Count | 4.18 VDC | 0 VDC |
| 1762791275 | 460 Count | 898 Count | 397 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)