This is the latest recevied telemetry packets stored in our database for station/object CE4ERM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795358619 | 19 C | 34.29 % | 1015.88 hPa | 0 | 0 |
| 1795358015 | 18.3 C | 35.97 % | 1016.5 hPa | 0 | 0 |
| 1795357411 | 18.6 C | 35.42 % | 1016.5 hPa | 0 | 0 |
| 1795356807 | 18.3 C | 36 % | 1016.88 hPa | 0 | 0 |
| 1795355599 | 18.7 C | 35.21 % | 1016.25 hPa | 0 | 0 |
| 1795354995 | 18 C | 36.41 % | 1016.38 hPa | 0 | 0 |
| 1795354391 | 17.1 C | 36.85 % | 1015.75 hPa | 0 | 0 |
| 1795353787 | 17.2 C | 38.66 % | 1015.13 hPa | 0 | 0 |
| 1795353183 | 15.8 C | 40.62 % | 1015.63 hPa | 0 | 0 |
| 1795352579 | 17 C | 38.06 % | 1016.5 hPa | 0 | 0 |
| 1795351975 | 15.5 C | 40.98 % | 1016.38 hPa | 0 | 0 |
| 1795351371 | 16.6 C | 39.1 % | 1017.5 hPa | 0 | 0 |
| 1795350767 | 15.9 C | 39.6 % | 1017.25 hPa | 0 | 0 |
| 1795350163 | 15.4 C | 40.1 % | 1016.38 hPa | 0 | 0 |
| 1795349559 | 14.5 C | 43.76 % | 1018.25 hPa | 0 | 0 |
| 1795348955 | 14.5 C | 42.21 % | 1016.38 hPa | 0 | 0 |
| 1795348351 | 14 C | 44.74 % | 1016.5 hPa | 0 | 0 |
| 1795347747 | 13.1 C | 45.79 % | 1017.13 hPa | 0 | 0 |
| 1795347143 | 12.9 C | 46.88 % | 1018.75 hPa | 0 | 0 |
| 1795346539 | 12.5 C | 47.58 % | 1017.88 hPa | 0 | 0 |
| 1795345935 | 12.2 C | 47.56 % | 1017.25 hPa | 0 | 0 |
| 1795345331 | 11.9 C | 49.16 % | 1017.5 hPa | 0 | 0 |
| 1795344727 | 11.5 C | 49.08 % | 1019.25 hPa | 0 | 0 |
| 1795344123 | 11.1 C | 50.1 % | 1017.5 hPa | 0 | 0 |
| 1795343519 | 10.5 C | 50.69 % | 1017.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)