This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775480297 | 5 | 4 | 37 | 41 | 1007 |
| 1775479115 | 8 | 0 | 37 | 40 | 1007 |
| 1775477895 | 6 | 1 | 37 | 40 | 1007 |
| 1775476680 | 8 | 1 | 38 | 39 | 1007 |
| 1775476134 | 8 | 0 | 38 | 40 | 1007 |
| 1775474918 | 8 | 0 | 37 | 40 | 1006 |
| 1775473698 | 8 | 0 | 38 | 40 | 1006 |
| 1775472478 | 7 | 1 | 37 | 40 | 1006 |
| 1775471263 | 9 | 1 | 38 | 40 | 1006 |
| 1775470948 | 8 | 1 | 37 | 41 | 1005 |
| 1775469732 | 8 | 1 | 37 | 40 | 1005 |
| 1775468510 | 8 | 1 | 37 | 41 | 1005 |
| 1775467289 | 9 | 1 | 37 | 40 | 1004 |
| 1775466076 | 9 | 1 | 37 | 40 | 1004 |
| 1775464854 | 11 | 0 | 37 | 39 | 1004 |
| 1775463634 | 8 | 1 | 37 | 38 | 1004 |
| 1775462419 | 8 | 1 | 37 | 38 | 1004 |
| 1775461199 | 9 | 1 | 37 | 37 | 1005 |
| 1775459979 | 9 | 0 | 38 | 36 | 1005 |
| 1775458762 | 10 | 0 | 39 | 36 | 1005 |
| 1775457541 | 8 | 1 | 39 | 34 | 1005 |
| 1775456320 | 8 | 1 | 40 | 34 | 1005 |
| 1775455104 | 9 | 1 | 40 | 33 | 1005 |
| 1775453883 | 9 | 1 | 40 | 33 | 1005 |
| 1775452662 | 9 | 1 | 40 | 33 | 1006 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)