This is the latest recevied telemetry packets stored in our database for station/object EA4RCR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775493158 | 26 | 25 | 942 | 0 | 0 |
| 1775492558 | 26 | 24 | 942 | 0 | 0 |
| 1775491958 | 26 | 24 | 942 | 0 | 0 |
| 1775491358 | 26 | 24 | 942 | 0 | 0 |
| 1775490758 | 26 | 24 | 942 | 0 | 0 |
| 1775490158 | 26 | 25 | 942 | 0 | 0 |
| 1775489558 | 26 | 26 | 943 | 0 | 0 |
| 1775488958 | 26 | 27 | 943 | 0 | 0 |
| 1775488358 | 26 | 26 | 943 | 0 | 0 |
| 1775487757 | 26 | 26 | 943 | 0 | 0 |
| 1775487157 | 26 | 26 | 943 | 0 | 0 |
| 1775486557 | 25 | 27 | 943 | 0 | 0 |
| 1775485957 | 25 | 26 | 943 | 0 | 0 |
| 1775485356 | 25 | 27 | 944 | 0 | 0 |
| 1775484757 | 25 | 27 | 944 | 0 | 0 |
| 1775484156 | 25 | 27 | 944 | 0 | 0 |
| 1775483556 | 25 | 27 | 944 | 0 | 0 |
| 1775482956 | 25 | 27 | 944 | 0 | 0 |
| 1775481756 | 25 | 27 | 945 | 0 | 0 |
| 1775481156 | 25 | 27 | 945 | 0 | 0 |
| 1775480556 | 25 | 27 | 945 | 0 | 0 |
| 1775479955 | 25 | 27 | 945 | 0 | 0 |
| 1775479356 | 25 | 27 | 945 | 0 | 0 |
| 1775478756 | 25 | 27 | 945 | 0 | 0 |
| 1775478155 | 25 | 27 | 945 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)