This is the latest recevied telemetry packets stored in our database for station/object EA5GVP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Pressure* | Humidity* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766760248 | 12 | 1007 | 71 | 0 | 0 |
| 1766759649 | 13 | 1007 | 69 | 0 | 0 |
| 1766759048 | 13 | 1007 | 67 | 0 | 0 |
| 1766758448 | 14 | 1007 | 65 | 0 | 0 |
| 1766757848 | 14 | 1007 | 64 | 0 | 0 |
| 1766757248 | 13 | 1007 | 64 | 0 | 0 |
| 1766756649 | 15 | 1007 | 60 | 0 | 0 |
| 1766756048 | 16 | 1007 | 57 | 0 | 0 |
| 1766755448 | 16 | 1007 | 60 | 0 | 0 |
| 1766754848 | 12 | 1007 | 71 | 0 | 0 |
| 1766754249 | 12 | 1007 | 74 | 0 | 0 |
| 1766753648 | 10 | 1007 | 77 | 0 | 0 |
| 1766753048 | 10 | 1007 | 80 | 0 | 0 |
| 1766752448 | 10 | 1007 | 78 | 0 | 0 |
| 1766751848 | 10 | 1007 | 79 | 0 | 0 |
| 1766751248 | 9 | 1007 | 79 | 0 | 0 |
| 1766750648 | 10 | 1007 | 79 | 0 | 0 |
| 1766750048 | 9 | 1007 | 81 | 0 | 0 |
| 1766749448 | 9 | 1007 | 81 | 0 | 0 |
| 1766748848 | 9 | 1007 | 84 | 0 | 0 |
| 1766748248 | 9 | 1007 | 85 | 0 | 0 |
| 1766747648 | 8 | 1007 | 86 | 0 | 0 |
| 1766747048 | 8 | 1007 | 86 | 0 | 0 |
| 1766746448 | 8 | 1007 | 86 | 0 | 0 |
| 1766745848 | 8 | 1008 | 86 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Pressure: 0, 1, 0
Humidity: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)