This is the latest recevied telemetry packets stored in our database for station/object EA4AOJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775479338 | 20 | 28 | 947 | 0 | 0 |
| 1775478738 | 20 | 27 | 947 | 0 | 0 |
| 1775478138 | 20 | 28 | 947 | 0 | 0 |
| 1775477538 | 20 | 28 | 948 | 0 | 0 |
| 1775476938 | 20 | 28 | 948 | 0 | 0 |
| 1775476338 | 20 | 28 | 948 | 0 | 0 |
| 1775475738 | 20 | 28 | 948 | 0 | 0 |
| 1775475138 | 20 | 28 | 948 | 0 | 0 |
| 1775474537 | 20 | 28 | 948 | 0 | 0 |
| 1775473937 | 20 | 28 | 948 | 0 | 0 |
| 1775473337 | 20 | 28 | 948 | 0 | 0 |
| 1775472737 | 20 | 28 | 949 | 0 | 0 |
| 1775472137 | 20 | 28 | 949 | 0 | 0 |
| 1775471537 | 20 | 28 | 949 | 0 | 0 |
| 1775470937 | 20 | 28 | 949 | 0 | 0 |
| 1775470337 | 20 | 28 | 949 | 0 | 0 |
| 1775469737 | 20 | 27 | 949 | 0 | 0 |
| 1775469137 | 20 | 27 | 949 | 0 | 0 |
| 1775468537 | 20 | 27 | 949 | 0 | 0 |
| 1775467936 | 20 | 28 | 949 | 0 | 0 |
| 1775467336 | 20 | 27 | 949 | 0 | 0 |
| 1775466736 | 20 | 28 | 949 | 0 | 0 |
| 1775466136 | 20 | 28 | 949 | 0 | 0 |
| 1775465536 | 20 | 28 | 949 | 0 | 0 |
| 1775464936 | 20 | 28 | 949 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)