EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

LZ1PDB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ1PDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatu*	Humidity*	Pressure*	Battery*
1754211009	29 °C	33 %RH	951 hPa	3.9 V
1754210409	30 °C	33 %RH	951 hPa	3.9 V
1754209809	29 °C	35 %RH	951 hPa	3.9 V
1754209209	28 °C	36 %RH	951 hPa	3.9 V
1754208609	28 °C	36 %RH	951 hPa	3.8 V
1754208009	28 °C	37 %RH	951 hPa	3.9 V
1754207409	28 °C	38 %RH	951 hPa	3.9 V
1754206809	27 °C	39 %RH	951 hPa	3.9 V
1754206209	26 °C	40 %RH	951 hPa	3.9 V
1754205609	25 °C	41 %RH	951 hPa	3.9 V
1754205009	25 °C	41 %RH	951 hPa	3.9 V
1754204409	25 °C	43 %RH	951 hPa	3.7 V
1754203809	24 °C	44 %RH	951 hPa	3.9 V
1754203208	24 °C	45 %RH	951 hPa	3.9 V
1754202608	23 °C	46 %RH	951 hPa	3.9 V
1754202008	23 °C	48 %RH	951 hPa	3.9 V
1754201408	22 °C	50 %RH	951 hPa	3.9 V
1754200808	22 °C	52 %RH	951 hPa	3.9 V
1754200209	21 °C	53 %RH	951 hPa	3.9 V
1754199608	21 °C	54 %RH	951 hPa	3.9 V
1754199008	21 °C	54 %RH	951 hPa	3.9 V
1754198408	20 °C	56 %RH	951 hPa	3.9 V
1754197808	20 °C	55 %RH	951 hPa	3.9 V
1754197208	20 °C	56 %RH	951 hPa	3.9 V
1754196608	20 °C	57 %RH	951 hPa	3.9 V

*Used Equation Coefficients:

Temperatu: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Battery: 0, 0.1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)