This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | PRES* | SAT* | HDOP* |
|---|---|---|---|---|---|
| 1762811146 | 37 °C | 39 % | 1005 mBar | 8 | 1 |
| 1762809946 | 37 °C | 38 % | 1005 mBar | 6 | 1 |
| 1762808743 | 38 °C | 38 % | 1004 mBar | 7 | 1 |
| 1762807543 | 37 °C | 38 % | 1004 mBar | 8 | 1 |
| 1762806343 | 38 °C | 38 % | 1004 mBar | 7 | 1 |
| 1762805143 | 38 °C | 38 % | 1004 mBar | 8 | 1 |
| 1762803943 | 38 °C | 38 % | 1004 mBar | 9 | 1 |
| 1762802743 | 38 °C | 38 % | 1004 mBar | 8 | 1 |
| 1762801543 | 38 °C | 38 % | 1004 mBar | 11 | 0 |
| 1762800343 | 38 °C | 38 % | 1005 mBar | 11 | 0 |
| 1762799143 | 38 °C | 38 % | 1005 mBar | 12 | 1 |
| 1762797943 | 38 °C | 37 % | 1005 mBar | 10 | 0 |
| 1762796743 | 38 °C | 37 % | 1005 mBar | 10 | 0 |
| 1762795543 | 38 °C | 37 % | 1005 mBar | 11 | 0 |
| 1762794326 | 38 °C | 37 % | 1005 mBar | 12 | 1 |
| 1762793126 | 38 °C | 37 % | 1006 mBar | 11 | 0 |
| 1762791926 | 39 °C | 37 % | 1006 mBar | 12 | 1 |
| 1762790726 | 39 °C | 37 % | 1006 mBar | 10 | 1 |
| 1762789526 | 38 °C | 38 % | 1006 mBar | 10 | 1 |
| 1762788326 | 38 °C | 38 % | 1006 mBar | 12 | 0 |
| 1762787126 | 38 °C | 39 % | 1006 mBar | 11 | 1 |
| 1762785926 | 38 °C | 39 % | 1006 mBar | 10 | 1 |
| 1762784726 | 39 °C | 39 % | 1006 mBar | 11 | 0 |
| 1762784109 | 38 °C | 39 % | 0 mBar | 11 | 0 |
| 1762782909 | 39 °C | 39 % | 1006 mBar | 9 | 1 |
*Used Equation Coefficients:
TEMP: 0, 1, 0
HUM: 0, 1, 0
PRES: 0, 1, 0
SAT: 0, 1, 0
HDOP: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)