This is the latest recevied telemetry packets stored in our database for station/object IQ9DM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754174076 | 27 Pkt/10m | 27 Pkt/10m | 4 Volt | 0 | 0 |
| 1754172873 | 24 Pkt/10m | 24 Pkt/10m | 4.02 Volt | 0 | 0 |
| 1754171669 | 27 Pkt/10m | 23 Pkt/10m | 4 Volt | 0 | 0 |
| 1754170465 | 22 Pkt/10m | 19 Pkt/10m | 4.02 Volt | 0 | 0 |
| 1754169261 | 37 Pkt/10m | 34 Pkt/10m | 4 Volt | 0 | 0 |
| 1754168057 | 36 Pkt/10m | 33 Pkt/10m | 4 Volt | 0 | 0 |
| 1754166854 | 19 Pkt/10m | 19 Pkt/10m | 4 Volt | 0 | 0 |
| 1754165650 | 35 Pkt/10m | 34 Pkt/10m | 4.02 Volt | 0 | 0 |
| 1754164446 | 20 Pkt/10m | 16 Pkt/10m | 4 Volt | 0 | 0 |
| 1754163242 | 0 Pkt/10m | 0 Pkt/10m | 4 Volt | 0 | 0 |
| 1754163221 | 0 Pkt/10m | 0 Pkt/10m | 4 Volt | 0 | 0 |
| 1754161801 | 32 Pkt/10m | 32 Pkt/10m | 4 Volt | 0 | 0 |
| 1754160597 | 50 Pkt/10m | 45 Pkt/10m | 4 Volt | 0 | 0 |
| 1754159393 | 33 Pkt/10m | 29 Pkt/10m | 4.02 Volt | 0 | 0 |
| 1754158190 | 22 Pkt/10m | 20 Pkt/10m | 4 Volt | 0 | 0 |
| 1754156986 | 27 Pkt/10m | 22 Pkt/10m | 4 Volt | 0 | 0 |
| 1754155782 | 49 Pkt/10m | 44 Pkt/10m | 4 Volt | 0 | 0 |
| 1754154578 | 55 Pkt/10m | 46 Pkt/10m | 4 Volt | 0 | 0 |
| 1754153374 | 37 Pkt/10m | 27 Pkt/10m | 4 Volt | 0 | 0 |
| 1754152171 | 1 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754152150 | 0 Pkt/10m | 0 Pkt/10m | 4 Volt | 0 | 0 |
| 1754150055 | 40 Pkt/10m | 29 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754148851 | 16 Pkt/10m | 10 Pkt/10m | 4.02 Volt | 0 | 0 |
| 1754148287 | 1 Pkt/10m | 0 Pkt/10m | 4 Volt | 0 | 0 |
| 1754148266 | 0 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)