EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SP9KPS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9KPS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1758409600	58 Count	1052 Count	47 Count
1758407799	52 Count	909 Count	43 Count
1758405998	45 Count	773 Count	37 Count
1758404198	39 Count	644 Count	32 Count
1758402397	31 Count	516 Count	26 Count
1758400596	25 Count	372 Count	21 Count
1758398795	18 Count	244 Count	15 Count
1758363567	17 Count	244 Count	15 Count
1758361766	9 Count	117 Count	8 Count
1758359965	58 Count	1024 Count	49 Count
1758358164	52 Count	895 Count	44 Count
1758356373	43 Count	718 Count	37 Count
1758354572	36 Count	543 Count	31 Count
1758352771	27 Count	424 Count	24 Count
1758350970	16 Count	293 Count	14 Count
1758349170	5 Count	151 Count	5 Count
1758347369	54 Count	1016 Count	44 Count
1758345568	48 Count	869 Count	39 Count
1758343767	41 Count	735 Count	34 Count
1758341967	34 Count	589 Count	28 Count
1758340166	21 Count	449 Count	18 Count
1758338365	14 Count	299 Count	12 Count
1758336564	7 Count	151 Count	6 Count
1758334775	56 Count	1093 Count	46 Count
1758332974	49 Count	953 Count	41 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)