This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771581681 | 48 Count | 833 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771579877 | 47 Count | 805 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1771578074 | 46 Count | 779 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1771576270 | 45 Count | 763 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1771574467 | 44 Count | 751 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1771572662 | 43 Count | 751 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1771570858 | 42 Count | 750 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1771569054 | 41 Count | 750 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1771567251 | 40 Count | 749 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1771565447 | 39 Count | 749 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1771563643 | 38 Count | 748 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1771561882 | 37 Count | 748 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1771560078 | 36 Count | 747 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1771558274 | 35 Count | 747 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771556471 | 34 Count | 734 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1771554667 | 33 Count | 715 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1771552864 | 32 Count | 696 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1771551060 | 31 Count | 676 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1771549257 | 30 Count | 658 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1771547453 | 29 Count | 645 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1771545650 | 28 Count | 631 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1771543847 | 27 Count | 617 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1771542043 | 26 Count | 602 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1771540281 | 25 Count | 587 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1771538477 | 24 Count | 564 Count | 0 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)