This is the latest recevied telemetry packets stored in our database for station/object CE3RCJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779383275 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779379674 | 4.18 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779376974 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779371573 | 4.19 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779359857 | 4.16 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1779358053 | 4.17 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1779356253 | 4.17 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1779354453 | 4.15 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1779350853 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779349052 | 4.16 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779348152 | 4.18 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1779347252 | 4.2 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779344552 | 4.16 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779343652 | 4.16 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1779342752 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779340951 | 4.14 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779340051 | 4.19 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1779339151 | 4.2 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1779338251 | 4.16 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779337351 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779336451 | 4.15 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1779335551 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779333751 | 4.16 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779332851 | 4.15 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1779331950 | 4.19 VDC | 0.66 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)