EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

OK4AB-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4AB-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatu*	Humidity*	Pressure*	Battery*
1779574440	26.29 C	50.6 %	987.9 hPa	0 V
1779574380	26.3 C	50.58 %	987.9 hPa	0 V
1779574321	26.34 C	50.56 %	987.9 hPa	0 V
1779574260	26.35 C	50.57 %	987.9 hPa	0 V
1779574201	26.37 C	50.61 %	987.9 hPa	0 V
1779574186	26.37 C	50.6 %	987.9 hPa	0 V
1779574120	26.38 C	50.61 %	987.9 hPa	0 V
1779574060	26.4 C	50.63 %	987.9 hPa	0 V
1779574000	26.42 C	50.65 %	987.9 hPa	0 V
1779573940	26.43 C	50.64 %	987.9 hPa	0 V
1779573880	26.44 C	50.67 %	987.9 hPa	0 V
1779573819	26.45 C	50.71 %	987.9 hPa	0 V
1779573760	26.46 C	50.73 %	987.9 hPa	0 V
1779573699	26.46 C	50.75 %	987.9 hPa	0 V
1779573639	26.46 C	50.82 %	987.9 hPa	0 V
1779573580	26.45 C	50.89 %	987.8 hPa	0 V
1779573520	26.42 C	51.01 %	987.8 hPa	0 V
1779573459	26.37 C	51.15 %	987.8 hPa	0 V
1779573400	26.34 C	51.25 %	987.8 hPa	0.05 V
1779573340	26.3 C	51.15 %	987.8 hPa	0.07 V
1779573279	26.28 C	51.2 %	987.8 hPa	0.09 V
1779573220	26.26 C	51.2 %	987.8 hPa	0.08 V
1779573159	26.23 C	51.26 %	987.8 hPa	0.08 V
1779573098	26.23 C	51.27 %	987.8 hPa	0.09 V
1779573038	26.26 C	51.18 %	987.8 hPa	0.1 V

*Used Equation Coefficients:

Temperatu: 0, 0.01, 0

Humidity: 0, 0.01, 0

Pressure: 0, 0.1, 800.8

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)