This is the latest recevied telemetry packets stored in our database for station/object SA3MHZ-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765918979 | -3.1 C | 43.41 % | 996 hPa | 0 | 0 |
| 1765915202 | 0.2 C | 40.76 % | 1008 hPa | 0 | 0 |
| 1765911598 | 1.6 C | 39.86 % | 1006.88 hPa | 0 | 0 |
| 1765907994 | 3.2 C | 38.1 % | 1006 hPa | 0 | 0 |
| 1765904390 | 5.4 C | 36.19 % | 1006 hPa | 0 | 0 |
| 1765900786 | 10 C | 32.92 % | 1006.5 hPa | 0 | 0 |
| 1765897182 | 19.6 C | 33.94 % | 1007.5 hPa | 0 | 0 |
| 1765897150 | 19.6 C | 33.94 % | 1006.5 hPa | 0 | 0 |
| 1765897120 | 18.9 C | 34.34 % | 1006.38 hPa | 0 | 0 |
| 1765897096 | 18.9 C | 34.34 % | 1005.75 hPa | 0 | 0 |
| 1765897080 | 18.9 C | 34.34 % | 1007.13 hPa | 0 | 0 |
| 1765897064 | 18 C | 35.43 % | 1004.38 hPa | 0 | 0 |
| 1765897048 | 18 C | 35.43 % | 1005.25 hPa | 0 | 0 |
| 1765897032 | 18 C | 35.43 % | 1005.88 hPa | 0 | 0 |
| 1765897013 | 17.2 C | 35.52 % | 1003.88 hPa | 0 | 0 |
| 1765896997 | 17.2 C | 35.52 % | 1004.38 hPa | 0 | 0 |
| 1765896981 | 17.2 C | 35.52 % | 1005.5 hPa | 0 | 0 |
| 1765896965 | 17.2 C | 35.52 % | 1006.5 hPa | 0 | 0 |
| 1765896948 | 16.3 C | 36.09 % | 1005 hPa | 0 | 0 |
| 1765896919 | 16.3 C | 36.09 % | 1005.88 hPa | 0 | 0 |
| 1765896903 | 16.3 C | 36.09 % | 1005.88 hPa | 0 | 0 |
| 1765896887 | 15.3 C | 36.96 % | 1005.75 hPa | 0 | 0 |
| 1765896813 | 14.1 C | 37.12 % | 1005.38 hPa | 0 | 0 |
| 1765896797 | 14.1 C | 37.12 % | 1005.13 hPa | 0 | 0 |
| 1765896661 | 11.7 C | 37.6 % | 1006.38 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)