This is the latest recevied telemetry packets stored in our database for station/object AE5AU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787576332 | 2.81 VDC | 0 | 0 | 0 | 0 |
| 1787573632 | 2.92 VDC | 0 | 0 | 0 | 0 |
| 1787570931 | 2.99 VDC | 0 | 0 | 0 | 0 |
| 1787568231 | 3.03 VDC | 0 | 0 | 0 | 0 |
| 1787567331 | 3.07 VDC | 0 | 0 | 0 | 0 |
| 1787566431 | 3.1 VDC | 0 | 0 | 0 | 0 |
| 1787565532 | 3.13 VDC | 0 | 0 | 0 | 0 |
| 1787564631 | 3.15 VDC | 0 | 0 | 0 | 0 |
| 1787563732 | 3.18 VDC | 0 | 0 | 0 | 0 |
| 1787562831 | 3.2 VDC | 0 | 0 | 0 | 0 |
| 1787561932 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1787561031 | 3.24 VDC | 0 | 0 | 0 | 0 |
| 1787560131 | 3.25 VDC | 0 | 0 | 0 | 0 |
| 1787559231 | 3.27 VDC | 0 | 0 | 0 | 0 |
| 1787558331 | 3.29 VDC | 0 | 0 | 0 | 0 |
| 1787557431 | 3.3 VDC | 0 | 0 | 0 | 0 |
| 1787556531 | 3.32 VDC | 0 | 0 | 0 | 0 |
| 1787555631 | 3.33 VDC | 0 | 0 | 0 | 0 |
| 1787554731 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1787553831 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1787552931 | 3.37 VDC | 0 | 0 | 0 | 0 |
| 1787552030 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1787551131 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1787550230 | 3.4 VDC | 0 | 0 | 0 | 0 |
| 1787549331 | 3.41 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)