This is the latest recevied telemetry packets stored in our database for station/object OK2PYA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771580037 | 45 Count | 46 Count | 44 Count | 4.32 VDC | 0 VDC |
| 1771579074 | 20 Count | 21 Count | 20 Count | 4.32 VDC | 0 VDC |
| 1771578111 | 1001 Count | 938 Count | 933 Count | 4.32 VDC | 0 VDC |
| 1771577146 | 982 Count | 920 Count | 915 Count | 4.32 VDC | 0 VDC |
| 1771576184 | 960 Count | 898 Count | 894 Count | 4.32 VDC | 0 VDC |
| 1771575220 | 935 Count | 873 Count | 870 Count | 4.32 VDC | 0 VDC |
| 1771573299 | 868 Count | 806 Count | 805 Count | 4.32 VDC | 0 VDC |
| 1771572330 | 841 Count | 780 Count | 779 Count | 4.31 VDC | 0 VDC |
| 1771523329 | 836 Count | 780 Count | 779 Count | 4.32 VDC | 0 VDC |
| 1771521407 | 791 Count | 737 Count | 736 Count | 4.32 VDC | 0 VDC |
| 1771519476 | 755 Count | 703 Count | 702 Count | 4.32 VDC | 0 VDC |
| 1771515619 | 665 Count | 617 Count | 616 Count | 4.32 VDC | 0 VDC |
| 1771513693 | 621 Count | 575 Count | 574 Count | 4.32 VDC | 0 VDC |
| 1771511766 | 577 Count | 533 Count | 532 Count | 4.32 VDC | 0 VDC |
| 1771507914 | 493 Count | 453 Count | 452 Count | 4.31 VDC | 0 VDC |
| 1771507505 | 482 Count | 447 Count | 446 Count | 4.32 VDC | 0 VDC |
| 1771505572 | 415 Count | 382 Count | 381 Count | 4.32 VDC | 0 VDC |
| 1771503645 | 385 Count | 354 Count | 353 Count | 4.32 VDC | 0 VDC |
| 1771501719 | 370 Count | 341 Count | 340 Count | 4.32 VDC | 0 VDC |
| 1771499792 | 327 Count | 300 Count | 299 Count | 4.32 VDC | 0 VDC |
| 1771497866 | 288 Count | 263 Count | 262 Count | 4.32 VDC | 0 VDC |
| 1771495939 | 241 Count | 218 Count | 217 Count | 4.32 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)